当前位置: 首页 > 软件与支持 > IP资源 > CAN2.0

CAN2.0 IP

 

The CAN2.0 IP controller implements the BOSCH CAN message transfer protocols 2.0A and 2.0B.

Specification 2.0A (which is equivalent to CAN 1.2) covers standard message formats (11-bit identifier);

Specification 2.0B covers both standard and extended message formats (both 11-bit and 29-bit identifiers).

 

 

 Features

 

  • Supports full CAN (CAN 2.0 A and CAN 2.0B)
  • Broadly compatible with a Philips SJA1000
  • Supports both 11-bit and 29-bit identifiers
  • Supports bit rates from less than 125Kbaud to more than 1Mbaud
  • 64 byte Receive FIFO
  • Acceptance filtering
  • Single-shot transmission option
  • Listen-only mode
  • Reception of own messages
  • Error interrupt generated for each CAN bus error
  • Arbitration lost interrupt with record of bit position
  • Read/write error counters
  • Programmable error limit warning

 


Block Diagram

 


 

 

Resource and performance

 

 

 

Download

 

Doc(.pdf)

 

CME_can_user_guide(EN01)

CME_can_example_user_guide(EN01)

 

Design(.rar)


CAN_example_M5




     加入我们    |     联系我们    |     官方微博    |     官方博客 京ICP备案12039486号     京公网安备110114001125号